Cuvillier Verlag

Publications, Dissertations, Habilitations & Brochures.
International Specialist Publishing House for Science and Economy

Cuvillier Verlag GmbH

De En Es
A Level Set Based Flamelet Model for the Prediction of Combustion in Homogeneous Charge and Direct Injection Spark Ignition Engines

Hard Copy
EUR 27.00 EUR 25.65

E-book
EUR 0.00

Download
PDF (1.6 MB)

A Level Set Based Flamelet Model for the Prediction of Combustion in Homogeneous Charge and Direct Injection Spark Ignition Engines (English shop)

Jens Ewald (Author)

Preview

Table of Contents, Datei (79 KB)
Extract, Datei (120 KB)

Numerical flow and combustion simulations of spark-ignition engine combustion processes using suitable turbulence and combustion models offer the possibility of supporting design and parameter studies. The subject of this work is the further development of combustion models suitable for this purpose.

The fuel converted in spark-ignition engine combustion processes is predominantly converted by premixed combustion in both homogeneous and stratified-charge operation. To model turbulent premixed combustion, a model based on the so-called Level Set concept is discussed. In the Level Set concept, the mean turbulent flame front is represented by a surface, and the burning rate is modeled by a turbulent burning velocity.

The work is structured as follows: First, after the introduction, the second chapter presents the necessary fundamentals of fluid mechanics and the turbulence modeling used. Then, in the third chapter, the combustion model based on the Level Set concept is derived. Particular attention is paid to the modeling of unsteady flame propagation, and a model is developed to describe the development of laminar flame kernels, such as those that also occur during electrical ignition.

In the fourth chapter, the presented combustion model is evaluated using selected test cases. For this purpose, a Reynolds-averaged turbulence model based on the turbulent kinetic energy k and the turbulent dissipation ε is used to predict the turbulent flow. The test cases consist of combustion simulations in a cylinder geometry with constant volume on the one hand and simulations in a realistic engine geometry on the other. For the test cases, comparisons with experiments in the engine geometry were carried out for both homogeneous operation and jet-guided direct-injection stratified-charge operation.

The work concludes with a discussion of the results and an outlook.

ISBN-13 (Printausgabe) 3865378005
ISBN-13 (Hard Copy) 9783865378002
ISBN-13 (eBook) 9783736918009
Final Book Format A5
Language English
Page Number 182
Edition 1
Volume 0
Publication Place Göttingen
Place of Dissertation Aachen
Publication Date 2006-03-01
General Categorization Dissertation
Departments Mechanical and process engineering
Keywords Spark Ignition Engine Combustion, Numerical Combustion Simulation, Turbulent Premixed Combustion, Level Set Method, Flamelet Modeling, Turbulent Flame Propagation, Laminar Flame Kernel Development, Turbulent Burning Velocity, Reynolds-Averaged Navier-Stokes Equations (RANS), k-ε Turbulence Model, Homogeneous Charge Operation, Direct Injection Stratified Charge Operation